Tables

Looking for a metal table that is strong enough for a phenolic resin top? We've got it. The 1" x 2", 16 gauge apron frame is attached to either a phenolic resin, chemical resistant laminate or a plastic laminate top. The frame can have either 14 gauge 30"H fixed legs (fixed height) or 14 gauge outer tube with a 16 gauge insert legs that range from 23-37"H (adjustable height). Legs are 1-1/4" square. Color: Black

Perfect for the physically impaired or for classroom demos. Constructed of solid oak, hardwood and oak veneers with a chemical resistant, earth-friendly UV finish. The 1-1/4" ChemGuard top is supplied with or without a stainless steel look sink, toggle switch water pump, two 2-1/2 gallon supply and waste containers, GFI AC duplex receptacle with inlet socket, 25' extension cord, two rod sockets, two each 3/4" diameter x 36" long upright rods, 1/2" x 40" crossbar and two rod clamps. With a mobile capacity of 500 lbs. it rolls easily on 4" ball-bearing swivel casters with brakes. Dovetailed drawers are constructed of plywood and ride on epoxy coated glides. Cupboard door and drawers have locks. Wheelchair accessible from two sides, measures 32"W x 29"H. Inside drawers measure: 14.5"W x 19"D x 6"H. Dimensions: 72"L x 24"D x 33"H. Weight: 240 lbs.

Fully adjustable two-station art/drafting/graphics table able to accommodate both elementary children through adults. This table comes with two (30" x 30") adjustable plastic laminate tops—one or both sides of the table can remain flat or at an angle. Both sides of the top include a pencil stop. The unique design of the leg allows you to adjust the height of the table in less than 30 seconds without the use of tools. The table adjusts from 27-3/4"-39"H (42" with included spacer) in 2 cm increments. Pencil stop included on hinge side of top. Overall size is 60"W x 30"D.

Fully adjustable two-station art/drafting/ graphics table is designed with two (24" x 30") adjustable tops, and also includes a stationary flat surface across the back to set a flat panel computer monitor. Both sides of the adjustable plastic laminate tops include a pencil stop. Accommodates both elementary and high school students. The powder-coated legs adjust in 2 cm increments in seconds without the use of tools. Height adjusts from 27-3/4"-39"H (42" with included spacer). Overall size is 60"W x 30"D.

Our adaptable drawing table’s height adjusts in 2 cm increments from 27-3/4"-39"H (42" with included spacer) in seconds, making it great for people that like to work at different heights. The art/drafting/graphics table is made for one student or teacher application. This plastic laminate top comes with one adjustable side (42" x 30") and one fixed (18" x 30") side. The adjustable side is great for drawing, while the fixed side works well for laptop or tabletop use. Pencil stop included on adjustable top side. Overall size 60"W x 30"D.

Adaptable...the name says it all. The height can be adjusted so easily—you can make the table adapt to your situation. The unique design of the leg allows you to adjust the height of the table in less than 30 seconds without the use of tools. Use the table at sitting height, standing height, or even at display height. Use the table for elementary children through adults. Adjust only one side of the table to create an easel. Ideal for use by a person in a wheelchair. Make it match the height they need. Table adjusts in 2 cm increments. The powder-coat legs include adjustable glides. Choose from two sizes and two tops. Height adjusts from 27-3/4-39"H (42" with included spacer).

Adaptable...the name says it all. The height can be adjusted so easily—you can make the table adapt to your situation. The unique design of the leg allows you to adjust the height of the table in less than 30 seconds without the use of tools. Use the table at sitting height, standing height, or even at display height. Use the table for elementary children through adults. Adjust only one side of the table to create an easel. Ideal for use by a person in a wheelchair. Make it match the height they need. Table adjusts in 2 cm increments. The powder-coat legs include adjustable glides. Choose from two sizes and two tops. Height adjusts from 27-3/4-39"H (42" with included spacer).

Adaptable...the name says it all. The height can be adjusted so easily—you can make the table adapt to your situation. The unique design of the leg allows you to adjust the height of the table in less than 30 seconds without the use of tools. Use the table at sitting height, standing height, or even at display height. Use the table for elementary children through adults. Adjust only one side of the table to create an easel. Ideal for use by a person in a wheelchair. Make it match the height they need. Table adjusts in 2 cm increments. The powder-coat legs include adjustable glides. Choose from two sizes and two tops. Height adjusts from 27-3/4-39"H (42" with included spacer).

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-3/4" Maple, Overall Dimensions: 60"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/4" Black Plastic Laminate, Overall Size: 60"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/4" Almond Plastic Laminate, Overall Size: 60"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/2” ShopTop®, Overall Size: 60"W x 30"D x 25.5"- 35.5"H