Tables

Sort by
Display per page

NPS® Steel Fixed Height Science Lab Table, 30 X 72 X 30, Epoxy Top, Grey

SLT9-3072E
  • 14 gauge steel tubing
  • 12 gauge top plate
  • Leveling glide and caster option
  • Black
$2,875.00

TABLE,COMP,1 EPXY TOP,42X72

C7406K30L
Book Compartment Tables are built with the same quality techniques as the plain apron table. They are finished with a chemical resistant, earth-friendly UV finish. These tables have either two or four book compartments (depending on size) installed in the apron. The book compartments measure 14" W x 13-5/8"D x 3-7/8"H. The table has a weight capacity of 500 lbs. On tables 72"W or over, we recommend ordering with leg braces and stretchers. (Shipped KD with tops attached)
$2,873.00

NPS® Wood Science Lab Table, 42 x 60 x 30, Trespa Top

SLT1-4260T
  • Solid Ash Legs And Apron
  • Rubber Liquid Protecting Boots
  • 500 lb Weight Capacity
  • Black
$2,871.00

SIDE DESK

1146K
It attaches to our 5' and 8' instructor desks. Crafted from solid oak, oak and hardwood veneers (same as the instructor's desk). It is finished with a chemical resistant, earth-friendly UV finish. The side desk features one 13-1/2"W x 18"D x 10-1/4"H file drawer, two 13-1/2"W x 18"D x 4"H storage drawers and one 19-1/2"W x 18"D x 3"H pencil drawer. All drawers come with locks. The unit includes a 14-1/2"W x 20"D pull-out writing board. The classroom side of the unit features a bookshelf with one fixed shelf. The unit can be attached to either the right or left side of the instructor desk.
$2,869.00

NPS® Wood Science Lab Table, 30 x 60 x 30, Epoxy Top

SLT1-3060E
  • Solid Ash Legs And Apron
  • Rubber Liquid Protecting Boots
  • 500 lb Weight Capacity
  • Black
$2,857.00

LIGHT TABLE, ADJUSTABLE TOP

LT-4424
We've put fun into drawing with our light table! This table is constructed of a maple hard wood frame and a plastic laminate almond colored top. The shatter-resistant glass inset gives maximum diffusion of light with minimum glare and no hot spots. The top adjusts from 0-30 degrees and is equipped with a soft-close feature and a pencil stop. Easy to plug in (installed 120 volt electrical cord). Four energy efficient fluorescent tubes are included. Top size: 39-3/4"H x 44"W x 24"D
$2,824.00

TABLE, RISER, EPOXY TOP, 72X30

PR7156K30S
Perfect table for STEAM projects. We’ve taken our popular oak and maple science tables and enhanced them by adding a riser. The table features solid oak or maple (your choice) aprons and riser supports finished with a chemical resistant finish. The riser has 10" clearance above the work surface and is 12"D and made of the same material as the top you choose. Top options include: plastic laminate, chemical resistant laminate, phenolic resin and epoxy resin. All 72"W tables include leg braces and a stretcher for added strength. Tables stand 30"H. The top of the riser is 41" from the floor.
$2,768.00

NPS® Wood Science Lab Table, 42 x 72 x 36, Phenolic Top

SLT2-4272P
  • Solid Ash Legs And Apron
  • Rubber Liquid Protecting Boots
  • Legs Attach With Metal On Metal Double Bolt Through Assembly On 13-Gauge Steel Corner Braces
  • Black
$2,759.00

NPS® Wood Science Lab Table, 24 x 72 x 36, Epoxy Top

SLT2-2472E
  • Solid Ash Legs And Apron
  • Rubber Liquid Protecting Boots
  • 500 lb Weight Capacity
  • Black
$2,752.00

ADA MOBILE LAB,FLAT TOP

4352KF
Perfect for the physically impaired or for classroom demos. Constructed of solid oak, hardwood and oak veneers with a chemical resistant, earth-friendly UV finish. The 1-1/4" ChemGuard top is supplied with or without a stainless steel look sink, toggle switch water pump, two 2-1/2 gallon supply and waste containers, GFI AC duplex receptacle with inlet socket, 25' extension cord, two rod sockets, two each 3/4" diameter x 36" long upright rods, 1/2" x 40" crossbar and two rod clamps. With a mobile capacity of 500 lbs. it rolls easily on 4" ball-bearing swivel casters with brakes. Dovetailed drawers are constructed of plywood and ride on epoxy coated glides. Cupboard door and drawers have locks. Wheelchair accessible from two sides, measures 32"W x 29"H. Inside drawers measure: 14.5"W x 19"D x 6"H. Dimensions: 72"L x 24"D x 33"H. Weight: 240 lbs.
$2,724.00

NPS® Wood Science Lab Table, 24 x 72 x 30, Epoxy Top

SLT1-2472E
  • Solid Ash Legs And Apron
  • Rubber Liquid Protecting Boots
  • 500 lb Weight Capacity
  • Black
$2,709.00

NPS® Wood Science Lab Table, 30 x 72 x 36, Trespa Top

SLT2-3072T
  • Solid Ash Legs And Apron
  • Rubber Liquid Protecting Boots
  • 500 lb Weight Capacity
  • Black
$2,708.00