Tables

Sort by
Display per page

TABLE, PLAIN, 1 EPXY TOP, 24X72

P7306M30SC
Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)
$1,753.00

NPS® Signature Science Lab Table, Black, 30 x 60, HPL Top,

SLT4-3060H
  • Legs Adjust Smoothly And Easily In ¾-Inch Increments – From 27” To 42” Height
  • Adapts for ADA Requirements
  • Easy Assembly, With Pre-Drilled Pilot Holes
  • Black
$1,753.00

TABLE,COMP,CHEM TOP,42X72

C7402K30L
Book Compartment Tables are built with the same quality techniques as the plain apron table. They are finished with a chemical resistant, earth-friendly UV finish. These tables have either two or four book compartments (depending on size) installed in the apron. The book compartments measure 14" W x 13-5/8"D x 3-7/8"H. The table has a weight capacity of 500 lbs. On tables 72"W or over, we recommend ordering with leg braces and stretchers. (Shipped KD with tops attached)
$1,752.00

TABLE, PLAIN, PHENLC TOP, 36X72

P7244K30LE
Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)
$1,752.00

TABLE, PLAIN, PHENLC TOP, 36X72

P7244K30SC
Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)
$1,751.00

TABLE, PLAIN, 1 EPXY TOP, 30X60

P7146K30S
Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)
$1,751.00

TABLE, PLAIN, 1 EPXY TOP, 30X60

P7146M30N
Available in a variety of sizes, with several different top materials. Constructed of solid maple and finished with an earth-friendly UV finish. Aprons are constructed of solid maple and are 13/16"D x 4-1/2"H with heavy-duty 13-gauge steel corner braces. The unit has solid 2-1/4" maple legs with 5/16" hanger bolt installed, and are attached to the table with nuts and washers (supplied). All tables include leg boots and levelers. Choose from plain or book compartment apron. Standard height is 30"H. Other sizes and options are available, call for more information. (Shipped KD with tops attached)
$1,749.00

TABLE, PLAIN, 1 EPXY TOP, 30X60

P7146K30LE
Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)
$1,748.00

NPS® Steel Height Adjustable Science Lab Table, 24 X 84, Phenolic Top, Black

SLT3-2484P
  • Steel Legs Adjust Smoothly And Easily In 1” Hole Increments – From 22.25” To 37.25” Height
  • Legs Built with 1 1/2" Square Tubing 14 Gauge Thickness
  • Leg Insert Built with 1 1/3" Square Tubing 16 Gauge Steel Frame
  • Black
$1,747.00

NPS® Steel Fixed Height Science Lab Table, 24 X 84 X 30, Phenolic Top, Black

SLT7-2484P
  • 14 gauge steel tubing
  • 12 gauge top plate
  • Leveling glide and caster option
  • Black
$1,747.00

NPS® Steel Height Adjustable Science Lab Table, 24 X 84 , Phenolic Top, Grey

SLT8-2484P
  • Steel Legs Adjust Smoothly And Easily In 1” Hole Increments – From 22.25” To 37.25” Height
  • Legs Built with 1 1/2" Square Tubing 14 Gauge Thickness
  • Leg Insert Built with 1 1/3" Square Tubing 16 Gauge Steel Frame
  • Black
$1,747.00

NPS® Steel Fixed Height Science Lab Table, 24 X 84 X 30, Phenolic Top, Grey

SLT9-2484P
  • 14 gauge steel tubing
  • 12 gauge top plate
  • Leveling glide and caster option
  • Black
$1,747.00