Science Labs

The drawing table system lets you choose from 11 table options. Besides the plain model the options include: six drawers, board storage for six, and combination six drawer with board storage. The deluxe model also includes a CPU holder, a monitor arm, keyboard tray, and mouse tray. All units are constructed of solid maple framing and reinforced with 13-gauge steel corner braces. Your choice of a one- or two-piece top made of 3/4" almond colored plastic laminate and equipped with a soft-close feature and a pencil stop. The top adjusts from 0 to 30 degrees. On the one-piece top models, the fully adjustable top measures 42"W x 30." On the two-piece top, the 30" x 30" left side of the top can be fully adjusted and is equipped with a soft-close feature and a pencil stop with a 12"W x 30"D flat top on the right side of the unit. CPU holder dimensions are 23"H x 11" W x 29"D (all adjustable). All the doors and drawers lock, and the drawers are completely finished and dovetailed on all four sides. The board storage models has six (25-1/4"H x 24-3/8"D x 1-1/4"W) spaces for drawing boards. Overall size:42"W x 30"D x 39-3/4"H.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

Looking for a metal table that is strong enough for a phenolic resin top? We've got it. The 1" x 2", 16 gauge apron frame is attached to either a phenolic resin, chemical resistant laminate or a plastic laminate top. The frame can have either 14 gauge 30"H fixed legs (fixed height) or 14 gauge outer tube with a 16 gauge insert legs that range from 23-37"H (adjustable height). Legs are 1-1/4" square. Color: Black